Step 2.2) Straighten out wiresĪfter untwisting the wires, they are probably still kinked and look like they want to be twisted. Untwist these pairs and separate them into the 8 wires. Each pair has a solid-colored wire and a striped-colored wire. There should be 4 pairs of wires: green, brown, orange, and blue. Take your time and make sure you do this step correctly! Otherwise you might have to go back and restart. NOTEThis is the hardest part of crimping! The wires are small and are hard to control. In this step, you’ll be taking the 8 colored wires inside the ethernet cable and putting them into the correct ordering of colors. Push the copper grounding wire to the side.Unwrap the blue foil shielding and plastic to uncover the twisted wire pairs.Push the cable into the razor slot of the strip tool and turn it around the cable to make an even cut around the sheath.If there are any missing lights on any of the pins, it means that you messed up somewhere and have to restart! How to Crimp an Ethernet CableĪssuming you have a crimping kit and an ethernet cable that needs to be crimped, here are all the steps! Step 0) Slip on the RJ45 boot (optional) Then you turn it on and the cable tester will test the connection for all 8 pins. They have two pieces that separate from each other, and you plug each end of your crimped ethernet cable into the port on each piece. RJ45 cable testers allow you to guarantee that you did the job correctly! They have to put slipped onto the cable before you put on the RJ45 connectors though! RJ45 Cable Tester It provides insulation and prevents the cable from being breaking easily. RJ45 boots can be optionally used to protect the RJ45 connector. They are what get plugged into ethernet ports! They also feature a latch/clip that locks the ethernet cable into the port once it is plugged in. RJ45 connectors are required for crimping because they feature the 8 golden pins that get crimped onto the 8 wires of the ethernet cable. The trickiest part about stripping cables is trying to avoid cutting the inner wires! RJ45 Connectors You can also do the same thing with a simple blade or pair of scissors. Cable StripperĬable strippers are used to take off the protecting shielding around cables and expose the inner wires. It also has blades that can be used to cut or strip wires. Its primary utility is to do the actual ‘crimping’ part of compressing/crimping the tiny gold pins in the RJ45 connector onto the ethernet cables. Although it’s technically possible to crimp ethernet cables without this specialized tool, it’s not very practical for crimping lots of cables. Here are some tools you should have in your crimping kit! RJ45 Crimping ToolĪn RJ45 crimping tool is the most essential tool. Therefore we need to be able to attach RJ45 connectors to the ends of these cut cables so that we can actually plug them in! Crimping Kit 5ft, 10ft, 50ft, etc.), it’s more practical to just have a big spool of cabling that we can roll out and cut to the exact length we need. Instead of buying premade ethernet cables of varying lengths (e.g. Setting up networks involves setting up long ethernet cable connections between different devices. This process is also called ‘RJ45 crimping’ because RJ45 is the name of the connectors that are used for ethernet cables, and they are what is being crimped. In this article, you’ll all about crimping ethernet cables! What is crimping an ethernet cable?Ĭrimping an ethernet cable is the process of attaching connectors onto the ends of ethernet cables.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |